ProRestore ELECTRO-GEN Manual do Operador descarregar pdf (Página 4)

OPERATING PRINCIPLE

OF THE ELECTRO-GEN

™

FOGGER

The ELECTRO-GEN UNIT is a dual purpose chemical application de-

vice: A THERMAL FOGGER which produces a very small size droplet

particle and an optional electric sprayer which produces a cold mist spray

similar to that produced by an aerosol can.

ColD sPRaYInG MoDe

At the touch of the trigger, an electric pump draws solution from the solu-

tion reservoir. The solution is pressurized and forced through a specially

restricted orice where the solution is atomized into a cold mist.

In the cold spraying mode the operator has a choice of utilizing water

based or solvent based formulations, such as fabric protectors, deodor-

ants, ame retardants, spotters, insecticides, etc.

Special Advisory

The use of resinous materials such as duct sealants, etc. may clog and

damage the unit and are to be avoided.

THeRMal foGGInG MoDe

At the touch of the trigger, an electric pump forces solution drawn from the

solution reservoir through an atomizing nozzle and into a thermostatically

controlled heating chamber in the barrel. The solution is vaporized instantly

and a cloud of smokelike fog surges out of the end of the barrel.

Application Advisory

For odor removal applications always utilize ODORx® Thermo 55™. ODORx

Thermo 55 is ready-to-use and should not be diluted with water. For pest

control applications be sure insecticide label permits THERMAL FOGGING.

For best results dry fog is recommended. The dryer the fog the smaller

the droplets, resulting in improved penetration and economical treatment.

Dryness of the fog is controlled by the rate of solution passing through

the heating chamber. This ow rate is controlled by turning the adjustment

knob clockwise for a dryer fog, and counter clockwise for a damper fog.

1 2 3 4 5 6 7 8 9 ... 14 15

Sem comentários

ProRestore ELECTRO-GEN Manual do Operador Página 4